XA160.5

 

Editor's Choice Award - The Absolute Sound

Products of the year 2003 Award - HiFi Review

Stereophile Recommended Components - Class A

 

 


The XA 160 mono block amplifier is a smaller and more physically manageable implementation of the XA 200. It delivers 160 watts into an 8-ohm load, and like the XA 200, cannot be induced to provide additional power under any operating circumstances.

The emphasis of all the amplifiers in this new series is to accentuate performance over power. Characteristics of this series include the warm midrange and sweet top end of the Aleph product, combined with the extreme dynamic range and definitive bass control of the X series amplifiers.

Supersymmetry, the patented circuit topology that is the cornerstone of the X-series, appears again in this new series of amplification, adding dynamic range, bass authority and control, and accurate detailing in support of the lush Class A output stage electronics. The XA 160 is built in the same chassis as the Pass X600 and X350, and presents form and function in a striking balance.

Gain 26dB
Freq. Response -3 dB at 1.5 Hz, -3 dB at 100 kHz
Power Output 160 watts maximum @ 1% THD, 1 kHz, 8 ohms
Distortion @ 1 KHz approx. 0.01% @ 10 W, 0.1% @100 W, 1% @ 160 W
Output Voltage Maximum plus, minus approx. 50 volts
Output Current Maximum  plus, minus approx. 7 amps
Input Impedance 22 kohm balanced, 11 kohm unbalanced
Damping factor 30 ref 8 ohms nominal
Slew rate approx. plus, minus 50 V/uS
Output Noise approx. 300 uV unweighted 20-20 kHz
Random noise floor approximately 2 uV
Dynamic range 154 dB (random noise floor to peak output)
Balanced CMRR approx. -60 dB @ 1 kHz (input common mode rejection ratio)
DC offset < 100 mv
Power Consumption approx. 550 watts
Dimensions 19"W x 11"H x 22"D
Weight 150lbs

 

Skriv for prisliste.

0,00,-