XA200.5The XA 200 mono block power amplifier is the first in an entirely new series of power amplifiers that significantly raises the standard of excellence in audio amplification. The “XA” series features a refined and elegantly simple, very highly biased, pure Class A mode of operation.
This new topology, descriptively characterized as being single-ended Class A, combines the very best of the original Pass Labs “Aleph” series with the present “X” series characteristics.
The XA 200 will deliver 200 watts into 8 ohms of impedance, and driving this amplifier harder will not produce any additional power. Speaker matching is therefore a consideration with the XA series amplifiers, as it was with the original Aleph series.
However, for the listener with efficient speakers who truly appreciate the most musical presentation possible, few if any amplifiers can approach the level of detail, intimacy, frequency response and dynamic range that the XA 200 will provide. Lush, detailed midrange, combined with a sweet and silky smooth top end, and the authority and bass control offered by Supersymmetry, works together in an intimate and transparent fashion.
| Gain |
26dB |
| Freq. Response |
-3 dB at 1.5 Hz, -3 dB at 100 kHz |
| Power Output |
200 watts maximum @ 1% THD, 1 kHz, 8 ohms |
| Distortion |
@ 1 KHz approx. 0.01% @ 10 W, 0.1% @100 W, 1% @ 200 W |
| Output Voltage |
Maximum plus, minus approx. 60 volts |
| Output Current |
Maximum plus, minus approx. 9 amps |
| Input Impedance |
22 kohm balanced, 11 kohm unbalanced |
| Damping factor |
30 ref 8 ohms nominal |
| Slew rate |
approx. plus, minus 50 V/uS |
| Output Noise |
approx. 300 uV unweighted 20-20 kHz |
| Random noise floor |
approximately 2 uV |
| Dynamic range |
155 dB (random noise floor to peak output) |
| Balanced CMRR |
approx. -60 dB @ 1 kHz (input common mode rejection ratio) |
| DC offset |
< 100 mv |
| Power Consumption |
approx. 650 watts |
| Dimensions |
19"W x 11"H x 28"D |
| Weight |
175lbs |
Skriv for prisliste. |
;)
;)